Our aircraft medical interiors are designed to provide from simple rescue service to accommodation of full intensive care equipment.

Our aircraft medical interiors are designed to provide from simple rescue service to accommodation of full medical and trauma intensive care equipment. Tell us what your air ambulance service requirements are:

  • domestic hospital to hospital transfers
  • remote site to hospital transfers
  • long range international, intercontinental medical transportation
  • dedicated air ambulance or multi-role aircraft
  • basic transportation
  • advanced medical and trauma life support
  • neonatal transportation
  • bariatric service
  • VIP airline series aircraft desiring emergency medical or medical suite service
  • corporate aircraft desiring emergency medical transportation capability
  • harsh environment operations
  • sea plane, amphibian aircraft
  • ski aircraft
  • tundra aircraft
  • intra aortic balloon pump transfers
  • ECMO transfers
Computer Aided Designing…Aero Medical Products has invested in SolidWorks® 3D modeling software. Our In House Designer can take any fixed wing or helicopter, layout the aircraft’s cabin space and present true to specification models of aircraft medical interiors. Our Designer takes into consideration existing cabin features, desired medical interior placement, specific and custom configurations desired, medical team and passenger seating, entry way up loading and off loading of the patient. Design services are particularly important with aircraft of limited cabin space, aircraft not traditionally used for air ambulance service such as regional and main line airliners and corporate, executive, dignitary, military and government aircraft with dual and multi-role requirements.

We work with you to define the aircraft medical interior that meets your service and budget goals.

An aeromedical interior should satisfy the pilots, the medical team, the patient and the purchasing department. Aero Medical Products continuous quality assurance program means our aircraft medical interiors exceed their expectations for safety first, ease of use, accessibility, comfort, years of service and no down time for maintenance.

STC/PMA-EASA approved for all twin and jet aircraft.
Lightest Stretcher Systems in the world!

The "Medstar Transporter" weight is only 84 pounds
(38.18 Kilo)
Medical Aircraft
Transport Equipment

by

AERO MEDICAL PRODUCTS CO., Inc.

2230 Stone Bridge Road

West Bend, Wisconsin -USA 53095

1.262.335.8000

AeroMedical LOGO transport equipment 600x140
Medstar and Standard series base accessories…

Oxygen systems
  • 3500 liters, 7500 liters, 10000 liters capacity
  • Aluminum, Kevlar and Carbon Fiber cylinders
  • European High Pressure cylinders and plumbing
  • Remote fill port. Fill port mounted on the face or end of the base. The oxygen cylinder remains secured.
  • Easy to read Oxygen Remaining gauge
  • Oxygen outlets; flow meter receptacle, 50 psi DISS, special order outlets

Vacuum (Suction) Pump and Compressed Air Pump
  • Pumps are wired for 28 v aircraft power operation. Pumps are independent of inverter operation
  • Vacuum pump develops 20 inches (508 mm) Hg of suction at 3.3 amps
  • Compressed air pump delivers 19.8 liters per minute at 3.3 amps
  • Lighted On / Off switches
  • Circuit breaker protected


Electrical Inverter
  • 115 vac and 230 vac inverters
  • 330 watts through 1000 watts
  • Two or four electric outlets on the face or end cap of the base
  • Lighted On / Off switch
  • Circuit breaker protected
  • Wiring Kit. The Wiring Kit carries electric power from the aircraft electrical system to the aircraft cabin for connection to the Medstar or Econo base Inverter. The Wiring Kit has a relay, wiring, Canon plug and instructions. The Wiring Kit is installed by the aircraft’s technicians.

click on either button to see product line

Our aircraft medical interiors are designed to provide from simple rescue service to accommodation of full intensive care equipment.

Our aircraft medical interiors are designed to provide from simple rescue service to accommodation of full medical and trauma intensive care equipment. Tell us what your air ambulance service requirements are:

  • domestic hospital to hospital transfers
  • remote site to hospital transfers
  • long range international, intercontinental medical transportation
  • dedicated air ambulance or multi-role aircraft
  • basic transportation
  • advanced medical and trauma life support
  • neonatal transportation
  • bariatric service
  • VIP airline series aircraft desiring emergency medical or medical suite service
  • corporate aircraft desiring emergency medical transportation capability
  • harsh environment operations
  • sea plane, amphibian aircraft
  • ski aircraft
  • tundra aircraft
  • intra aortic balloon pump transfers
  • ECMO transfers
Computer Aided Designing…Aero Medical Products has invested in SolidWorks® 3D modeling software. Our In House Designer can take any fixed wing or helicopter, layout the aircraft’s cabin space and present true to specification models of aircraft medical interiors. Our Designer takes into consideration existing cabin features, desired medical interior placement, specific and custom configurations desired, medical team and passenger seating, entry way up loading and off loading of the patient. Design services are particularly important with aircraft of limited cabin space, aircraft not traditionally used for air ambulance service such as regional and main line airliners and corporate, executive, dignitary, military and government aircraft with dual and multi-role requirements.

We work with you to define the aircraft medical interior that meets your service and budget goals.

An aeromedical interior should satisfy the pilots, the medical team, the patient and the purchasing department. Aero Medical Products continuous quality assurance program means our aircraft medical interiors exceed their expectations for safety first, ease of use, accessibility, comfort, years of service and no down time for maintenance.

© 2009-2011 Aero Medical Products Co., Inc. 2230 Stone Bridge Road, West Bend, Wisconsin - USA 53095 - 1.262.335.8000